Here is the cut sample that I settled on the other day and I really think that it is pushing it a little and I have slowed down to ipm since then and it is cutting good for what I am cutting. I cut a piece out yesterday using the setting below but left alot of dross in the backsideā¦. Those look awesome, makes me think that maybe I need to go with the hypertherm? I believe that the post processor with the z axis commands were throwing your times off. You should see a slightly longer delay in each line with the longest delay on the outside.
#Sheetcam mach3 download
Gunny, download this file and change the. Not sure which one of us your question is directed to but yes, I am using the crossfire profile with Mach3. What post processor did you select for sheetcam, it sounds like it may be waiting for the z axis to travel down I am fixing to leave work and it takes me about an hour and a half to get home then I will look and see what post processor I chose, I believe there is one for mach3 with no z axis and I may have chosen that one but it has been a while and I already packed up my laptop I am also sending you a pm.
![sheetcam mach3 sheetcam mach3](https://www.makecnc.com/prodimages/SheetCam_plasma_cam_software_500.jpg)
No matter what I do it always delays that long. I have changed the other pierce delays in the. I wonder if there is a setting for the pre-flow of air? I just checked - no pre-flow. I am still running into issues with this. I came over from the other post that I hijacked. Then you should be good to go on pierces less than 1 second, at least that is how it works for me.
![sheetcam mach3 sheetcam mach3](https://img.directindustry.com.ru/images_di/photo-mg/64456-16041832.jpg)
This is something that I see has come up several times and it got me in the beginning so I will share what fixed it for me.